Map & Directions

Broaching & Machining

Products- Sleeves

Sturdy Broaching Service

CERTIFICATE OF REGISTRATION
( click below ):

Download PDF

Products - Sleeves

Plain Square Holed Sleeves	Square Holed Sleeves with back-up screw	Pre-heat treated sq. holed sleeves made from stressproof steel
Pre-heat treated hex holed sleeves made from stressproof steel	Hexagon Holed Sleeves	Splined Sleeves
Thrif-T Boring Bars	Square Holed Collet Adapters	Special Sleeves

Plain Square Hole Sleeves
Cold Roll Mild Steel

Sleeves can be furnished with .015" oversize O.D. upon request.
When ordering oversize sleeves add the letter "G" to the sleeve number.

Square Hole Sleeves with threading and back-up screw
Cold Roll Mild Steel

Sleeves can be furnished with .015" oversize O.D. upon request.
When ordering oversize sleeves add the letter "G" to the sleeve number.

Pre-heat Treated Square Hole Sleeves
Stressproof Material - 24/28 RC

Pre-heat Hexagon Hole Sleeves
Stressproof Material - 24/28 RC

Hexagon Holed Sleeves
Cold Roll Mild Steel

Splined Sleeves - 6 Splines
Stressproof Material - 24/28 RC
SAE straight-sided splines

Splined Sleeves - 10 Splines
Stressproof Material - 24/28 RC
SAE straight-sided splines

Thrif-T Boring Bars
Material - 8620
Each bar has a 90-degree square hole in one end and
a 45-degree square hole in the other,
both holes have an adjusting backup screw.

Square Hole Collet Adapters
Material - 4140
with turned O.D. and Black Oxide Finish

Special Sleeves

ISO 9001:2000 Certified
ANSI*RAB QMS Accredited

| Home | About Us | Products - Sleeves | Broaching & Machining | Contact Us | Map and Directions |

( Click on the picture below to see sleeve specifications )